1 Note: This trick will only work with a two cycle engine.
Make sure that the kill-switch is depressed. You don't want the engine starting while you're tinkering with it.
Make sure that the kill-switch is depressed. You don't want the engine starting while you're tinkering with it.
2 Open the hood of the sled and locate the spark plug. It's location may vary slightly in each model. If you can't find it or don't know what a spark plug looks like, reference the user's manual.
3 Remove the spark plug with the spark plug wrench and clean the gas off of it with a rag. If you don't have a rag, a shirt sleeve will do.
4 With the spark plug removed, pull the starter-chord a few times to turn the engine and clear the excess gas out.
5 Replace the spark plug and close the hood. The snowmobile should be ready to start.
No comments:
Post a Comment